Cyfres T Tailstock Turret Servo
Ffurfweddu Cynnyrch
Nodweddion peiriant
Anhyblygrwydd uchel, torri trwm, a sefydlogrwydd uchel: Mae'n mabwysiadu gwely inLined cast annatod, strwythur gwely wedi'i leinio 30 °, a dyluniad asen trwchus i leihau afluniad ac anffurfiad thermol.
Cywirdeb uchel ac ymateb deinamig uchel: Defnyddir Bearings peli manwl uchel yn y blaen a'r cefn i gyflawni anhyblygedd gwerthyd uchel a chywirdeb cylchdro gwerthyd hynod o uchel.
Uned servo gwerthyd, manwl uchel a chynnal a chadw cyfleus.
Effeithlonrwydd uchel: Y cyflymder gwerthyd uchaf yw 4500 rpm / min, a gall y symudiad cyflym gyrraedd 30m / min.
Manylebau Technegol
| Prosiect | CNC-460T(460) | CNC-520T(460) | CNC-520T(520) | CNC-650T(700) | |
| Ffrâm Gwely | Mae'r gwely a'r gwaelod wedi'u gwneud o haearn bwrw o ansawdd uchel, ac mae'r gwely ar oleddf 40 °. | Mae'r gwely a'r gwaelod wedi'u gwneud o haearn bwrw o ansawdd uchel, ac mae'r gwely ar ogwydd ar 30 °. | |||
| Prosesu | Max. diamedr swing dros y gwely | 580mm | 580mm | 600mm | 600mm |
| Max. prosesu diamedr disgiau | 400mm | 400mm | 350mm | 400mm | |
| Max. prosesu diamedr y cerbyd | 280mm | 280mm | 350mm | 400mm | |
| Max. prosesu hyd y bar | 460mm | 460mm | 520mm | 700mm | |
| Max. diamedr bar | ф45mm | ф51mm | ф51mm | ф65mm | |
| Teithio | Teithio Max.X-echel | 230mm | 240mm | 220mm | 220mm |
| Max. Teithio echel Z | 500mm | 500mm | 550mm | 770mm | |
| Cyflymder cyflym echel X/Z | 30 munud | 30m/munud | 24m/munud | 25m/munud | |
| Diamedr/traw sgriw X/Z | 32/10mm | 32/10mm | X:40/10mm | 40/10mm | |
| Lled canllaw llinellol X/Z | 35mm | 35mm | 45mm | 35mm | |
| Modur servo echel X | β12 (brêc) | β12 (brêc) | β12 (brêc) | β12 (brêc) | |
| Modur servo echel Z | β12 | β12 | β12 | β12 | |
| Modur servo tyred | 3N.m | 3N.m | 3N.m | 3N.m | |
| Cywirdeb | Cywirdeb lleoli echel X/Z | ±0.003mm | ±0.003mm | ±0.003mm | ±0.003mm |
| Ailadroddadwyedd echel X/Z | ±0.003mm | ±0.003mm | ±0.003mm | ±0.003mm | |
| Symud Tailstock | Manylebau llawes tailstock | Mohs#5 | Mohs#5 | Mohs#5/80 | Mohs#5 |
| Teithio llawes tailstock | 40-460mm | 40-460mm | 50-600mm | 50-800mm | |
| Amrediad pwysau tailstock | 5-30Kg/cm² | 5-30Kg/cm² | 5-30Kg/cm² | 5-30Kg/cm² | |
| Dull symud tailstock | Hydrolig rhaglenadwy | Hydrolig rhaglenadwy | Hydrolig rhaglenadwy | Wedi'i yrru gan gyfrwy, | |
| gwerthyd | tapr gwerthyd | A2-5 | A2-6 | A2-6 | A2-6 |
| Diamedr turio gwerthyd | ф56mm | ф75mm | ф75mm | ф75mm | |
| Max. cyflymder gwerthyd | 6000rpm | 4500rpm | 4500rpm | 4000rpm | |
| Spindle servo pŵer modur | 7.5/11KW | 1KW | 11/15KW | 11/15KW | |
| Chuck / silindr cylchdro | 6"/6" | 8"/8" | 8"/8时 | 8" | |
| Tyred | Manylebau tyred | 80Canolfan uchel/ | 80Canolfan uchel/ | 100Canolfan uchel/ | 100Canolfan uchel/ |
| Pen torrwr mawr | 340 | 340 | 420 | 380 | |
| Manylebau deiliad offer | □25×25 | □25×25 | □25×25 | □25×25 | |
| Deiliad teclyn diflas | ф40mm | ф40mm | ф40mm | ф40mm | |
| Arall | Cyfanswm cynhwysedd | 15KW | 20KW | 20KW | 20KW |
| Pwysau net offeryn peiriant | Tua 4500Kg | Tua 4500K | Tua 5000Kg | Tua 5700Kg | |
| Maint peiriant (hyd × lled × uchder) | 2600 × 1700 × 1900mm | 2600 × 1700 × 1900mm | 2800 × 2000 × 1900mm | 2800 × 1800 × 1800mm | |
| Prosiect | CNC-860T(1000) | CNC-860T(2000) | CNC-860T(3000) | |
| Ffrâm Gwely | Mae'r gwely a'r gwaelod wedi'u gwneud o haearn bwrw o ansawdd uchel, ac mae'r gwely ar ogwydd ar 40 °. | |||
| Prosesu | Max. diamedr swing dros y gwely | 780mm | 7800m | 780mm |
| Max. prosesu diamedr disgiau | 600mm | 600mm | 600mm | |
| Max. prosesu diamedr y cerbyd | 500mmmm | 500mmm | 500mmm | |
| Max. prosesu hyd y bar | 1000mm | 2000mm | 3000mm | |
| Max. diamedr bar | ф75mm | ф75mm | ф75mm | |
| Teithio | Teithio Max.X-echel | 350mm | 350mm | 350mm |
| Max. Teithio echel Z | 1050mm | 2050mm | 3050mm | |
| Cyflymder cyflym echel X/Z | 18m/munud | 18m/munud | 15m/munud | |
| Diamedr/traw sgriw X/Z | X50/08mm | X: 50/08mm | X: 50/08mm | |
| Lled canllaw llinellol X/Z | 55mm | 55mm | 55mm | |
| Modur servo echel X | P22(Brêc) | β22 (brêc) | β22 (brêc) | |
| Modur servo echel Z | β22 | β22 | β30 | |
| Modur servo tyred | 3N.m | 3N.m | 3N.m | |
| Cywirdeb | Cywirdeb lleoli echel X/Z | ±0.003/300mm | ±0.003/300mm | ±0.003/300mm |
| Ailadroddadwyedd echel X/Z | ±0.003/300mm | ±0.003/300mm | ±0.003/300mm | |
| Symud Tailstock | Manylebau llawes tailstock | Mohs#5 | Mohs#5 | Mohs#5 |
| Teithio llawes tailstock | ф150/200mm | ф150/200mm | ф150/200 | |
| Amrediad pwysau tailstock | 5-30Kg/cm² | 5-30Kg/cm² | 5-30Kg/cm | |
| Dull symud tailstock | Hydrolig rhaglenadwy | Hydrolig rhaglenadwy | Hydrolig rhaglenadwy | |
| gwerthyd | tapr gwerthyd | A2-8 | A2-8 | A2-8 |
| Diamedr turio gwerthyd | ф88mm | ф8Bmm | ф88mm | |
| Max. cyflymder gwerthyd | 2500rpm | 2500rpm | 2500rpm | |
| Spindle servo pŵer modur | 15KW | 18.5KW | 22KW | |
| Chuck / silindr cylchdro | 10"/10" | 10"/10" | 10"/10" | |
| Tyred | Manylebau tyred | 100Canolfan uchel/ | 125Canolfan uchel/ | 125Canolfan uchel/ |
| Pen torrwr mawr | 440 | 440 | 440 | |
| Manylebau deiliad offer | □32×32 | □32×32 | □32×32 | |
| Deiliad teclyn diflas | ф50mm | ф50mm | ф50mm | |
| Arall | Cyfanswm cynhwysedd | 27KW | 31KW | 35KW |
| Pwysau net offeryn peiriant | Tua 7700Kg | Tua 9700Kg | Tua 18500Kg | |
| Maint peiriant (hyd × lled × uchder) | 6000 × 2300x2550mm | 7000 × 2300 × 2550mm | 7500 × 2500 × 2550mm | |
| Prosiect | CNC-960T(1000) | CNC-960T(2000) | CNC-960T(3000) | |
| Ffrâm Gwely | Mae'r gwely a'r gwaelod wedi'u gwneud o haearn bwrw o ansawdd uchel, ac mae'r gwely ar ogwydd ar 40 °. | |||
| Prosesu | Max. diamedr swing dros y gwely | 880mm | 880mm | 880mm |
| Max. prosesu diamedr disgiau | 600mm | 600mm | 600mm | |
| Max. prosesu diamedr y cerbyd | 600mmm | 600mmm | 600mmm | |
| Max. prosesu hyd y bar | 1000mm | 2000mm | 3000mm | |
| Max. diamedr bar | ф91mm | φ91mm | φ91mm | |
| Teithio | Teithio Max.X-echel | 350mm | 350mm | 350mm |
| Max. Teithio echel Z | 1050mm | 2050mm | 3050mm | |
| Cyflymder cyflym echel X/Z | 18m/munud | 18m/munud | 15m/munud | |
| Diamedr/traw sgriw X/Z | X: 50/08mm | X: 50/08mm | X: 50/08mm | |
| Lled canllaw llinellol X/Z | 55mm | 55mm | 55mm | |
| Modur servo echel X | β22 (brêc) | β22 (brêc) | β22 (brêc) | |
| Modur servo echel Z | β22 | β22 | β30 | |
| Modur servo tyred | 3N.m | 3N.m | 3nm | |
| Cywirdeb | Cywirdeb lleoli echel X/Z | ±0.003/300mm | ±0.003/300mm | ±0.003/300mm |
| Ailadroddadwyedd echel X/Z | ±0.003/300mm | ±0.003/300mm | ±0.003/300mm | |
| Symud Tailstock | Manylebau llawes tailstock | Mohs#5 | Mohs#5 | Mohs#5 |
| Teithio llawes tailstock | ф150/200mm | ф150/200mm | ф150/200mm | |
| Amrediad pwysau tailstock | 5-30Kg/cm² | 5-30Kg/cm² | 5-30Kg/cm² | |
| Dull symud tailstock | Hydrolig rhaglenadwy | Hydrolig rhaglenadwy | Hydrolig rhaglenadwy | |
| gwerthyd | tapr gwerthyd | A2-11 | A2-11 | A2-11 |
| Diamedr turio gwerthyd | ф105mm | ф105mm | ф105mm | |
| Max. cyflymder gwerthyd | 2200rpm | 2200rpm | 2200rpm | |
| Spindle servo pŵer modur | 15KW | 22KW | 22KW | |
| Chuck / silindr cylchdro | 12"/12" | 12"/12" | 12"/12" | |
| Tyred | Manylebau tyred | 125Canolfan uchel/ | 125Canolfan uchel/ | 125Canolfan uchel/ |
| Pen torrwr mawr | 440 | 440 | 440 | |
| Manylebau deiliad offer | □32×32 | □32×32 | □32×32 | |
| Deiliad teclyn diflas | ф50mm | ф50mm | ф50mm | |
| Arall | Cyfanswm cynhwysedd | 27KW | 35KW | 35KW |
| Pwysau net offeryn peiriant | Tua 8200Kg | Tua 10200Kg | Tua 12700Kg | |
| Maint peiriant (hyd × lled × uchder) | 6000 × 2300x2550mm | 7000 × 2300 × 2550mm | 8500 × 2300 × 2550mm | |
Nodweddion Ffurfweddu
gwerthyd
Cefnogi torri manwl uchel a dyletswydd trwm i gynyddu cynhyrchiant.
Tyred
Yn gwella dibynadwyedd mynegeio ac yn sicrhau anhyblygedd uchel.
System
Safonol FANUC F Oi-TF Plus CNC System, perfformiad prosesu uchel cyfradd gweithredu uchel, rhwyddineb defnydd uchel.
Anhyblygrwydd Uchel
Cast ar ddyletswydd trwmIron Sylfaen A Chydrannau, Amsugno sioc cryf a sefydlogrwydd uchel.
Sgriw Pêl
Sgriw pretensioning, adlach a elongation codiad tymheredd areelminated ymlaen llaw.
Canllaw Llinellol Roller
Torri arc, torri bevel, a gwead wyneb unffurf. Cylchdroi cyflym cyffredinol.
